AirLift Diamond has a durable, integrated slip-resistant wear layer of high-density vinyl foam polymetrically bonded to a resilient and supportive vinyl sponge cushion. Constructed of 100% closed cell vinyl foam with beveled edges for smooth surface-to-surface transitions. This mat features moisture and stain resistant properties that cut cleaning and maintenance time in half. Material can easily be cut to fit any work area as needed.
Offered in black or black with yellow stripe
MAINTENANCE
Apply rubbing alcohol [Isopropyl Alcohol/IPA] to the surface of the flexible PV product, wipe clean with a paper towel, and allow to air dry.Where applicable, a mild detergent or soap used with warm water can also be used to clean flexible PVC products. Once clean, allow the material to air dry, either removing any excess water/moisture with an absorbent cloth, or shaking smaller mats and allowing excess water to run off the larger roll goods.
CAUTION: Flexible vinyl products are slippery when wet. They are not recommended for use in areas/environments that are constantly wet.
Ensure that both the mat and the floor surface are both completely dry before placing the mat back on the floor. If one or the other or both are not completely dry, the plasticizer can interact with nitrocellulose lacquer (used on older wood floors) or various floor waxes and other cleaning agents (used to clean tile, resilient vinyl flooring, and marble floors, etc.), in a process generally referred to as “lacquer mar”. This can cause the lacquer or wax to soften, resulting in a marred surface. To avoid such complications, ensure that both the mat and floor are completely dry.
DO NOT USE HEAT of any kind to dry PVC materials. Though inherently flame resistant, Polyvinyl Chloride products will burn when given enough exposure to open flame or other heat sources of sufficient temperature-regardless of type or amount of flame retardant(s) added to the formulation.
AVOID: Halogens, concentrated Oxidizing Agents, Ethers, Ketones, and Low-Molecular Weight Solvents derived from the Ether and Ketones families. They include (but are not limited to) TetraHydroFuran (THF), Methyl Ethyl Ketone (MEK), Methyl IsoButyl Ketone (MIBK) and Acetone. These chemicals will mar and/or destroy the surface of the PVC product (the Ketones), react with (Oxidizing Agents), or actually dissolve it (THF and other Ethers).
CUSTOM SIZES
Available in individual custom sized mats or 60' rolls (2' x 60', 3' x 60', and 4' x 60'). The 1/2" comes in black and black with a yellow stripe.
FLAMMABILITY RATING
DOT FMVSS 302 [Horizontal Burn Test] - Pass*
<1” diameter CPCS FF 1-70 [Methenamine Tablet Test] - Pass
*Product failed to burn long enough to reach the required 1 ½” length to start the test
CHEMICAL RESISTANCE
Resistant to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
Recommended uses: manufacturing/industrial work areas, nursing/healthcare stations, pharmaceutical counters, and retail/shipping/packaging counters.
Construction: Closed cell expanded polyvinyl chloride sponge with diamond surface
Product Height: 1/2"
Production Time: 7-10 Business Days
Frequently Asked Questions
What is the AirLift Diamond Anti-Fatigue Mat made of?
It is constructed of 100% closed-cell vinyl foam with a diamond surface, featuring a high-density vinyl foam wear layer polymetrically bonded to a resilient vinyl sponge cushion.
What thickness does the AirLift Diamond come in?
The mat is available in a 1/2" thickness, offered as individual custom-sized mats or in 60' rolls in 2', 3', and 4' widths.
What color options are available?
The AirLift Diamond is available in black or black with a yellow stripe.
Can the mat be cut to fit a specific work area?
Yes, the material can easily be cut to fit any work area as needed.
How do I clean the AirLift Diamond Anti-Fatigue Mat?
Apply rubbing alcohol (isopropyl alcohol/IPA) to the surface, wipe clean with a paper towel, and allow it to air dry. A mild detergent with warm water is also acceptable.
Is it safe to use heat to dry the mat?
No, you should never use heat of any kind to dry PVC materials, as sufficient heat exposure can cause the product to burn.
Is the AirLift Diamond suitable for wet environments?
No, flexible vinyl products are slippery when wet and are not recommended for areas that are constantly wet.
Where is the AirLift Diamond Anti-Fatigue Mat best used?
It is recommended for manufacturing and industrial work areas, nursing and healthcare stations, pharmaceutical counters, and retail, shipping, and packaging counters.
