Anti-Fatigue Mats - Warehouse Sale

Our anti-fatigue mat that is designed to provide comfort; to improve circulation; and to reduce strain on feet, legs, and the lower back. Great for light to moderate standing environments. 

AIRLIFT STANDARD ANTI-FATIGUE MAT
Constructed of 100% closed cell vinyl foam with beveled edges for smooth surface-to-surface transitions. This mat features moisture and stain resistant properties that cut cleaning and maintenance time in half. 

AVAILABLE SIZES
24" x 24" (3/8) Textured/Black
24" x 36" (3/8) Textured/Black
27" x 36" (3/8") Textured/Black with Yellow Stripe
27" x 36" (3/8") Ribbed/Black with Yellow Stripe
27" x 60" (3/8") Ribbed/Black with Yellow Stripe
27" x 120" (3/8) Textured/Grey
36" x 60" (3/8") Diamond/Black
36" x 60" (3/8") Textured/Black with Yellow Stripe
36" x 60" (3/8") Textured/Black 
36" x 96" (3/8") Textured/Pink
41" x 120" (5/8") Textured/Black
48" x 60" (3/8") Diamond/Black with Yellow Stripe
48" x 72" (1/2") Black with Yellow Stripe

AIRLIFT PLUS SMOOTH SHIELD ANTI-FATIGUE MAT
Durable, Smooth Solid Vinyl Surface with Poly Foam Cushioning. 

AVAILABLE SIZES
36" x 60" (1/2) Smooth/Grey
48" x 72" (1/2) Smooth/Grey

AIRLIFT MARBLE ANTI-FATIGUE MAT
AirLift Marble Anti-Fatigue Mats feature a durable integrated wear surface of solid vinyl that is bonded to a moisture resistant, closed-cell vinyl foam cushion. Extra comfortable 1/2" overall thickness. Beveled surface edges and rounded corners enable smooth surface-to-surface transitions. 

AVAILABLE SIZES
24" x 72" (1/2) Blue

AIRLIFT PLUS SUPER SHIELD ANTI-FATIGUE MAT
Cost effective alternative to other laminated foam-based products. 1/2" overall thickness provides comfort and relief from standing. Durable beveled edges provide users with a "lay flat" safety border, ensuring smooth surface-to-surface transitions. Construction combines a 1/8" wear surface with a 3/8" closed cell vinyl base layer.

AVAILABLE SIZES
30" x 48" (1/2) Grey
36" x 120" (1/2) Grey    

AIRLIFT PLUS STAIN GUARD ANTI-FATIGUE MAT
Two layer mat featuring a durable viny-nitrile surface polymetrically bonded to a resilient vinyl-nitrile foam cushion using an exclusive adhesive-free UniBond manufacturing process.

AVAILABLE SIZES
30" x 90" (1/2") Textured/Black

MAINTENANCE
Apply rubbing alcohol [Isopropyl Alcohol/IPA] to the surface of the flexible PV product, wipe clean with a paper towel, and allow to air dry. Where applicable, a mild detergent or soap used with warm water can also be used to clean flexible PVC products. Once clean, allow the material to air dry, either removing any excess water/moisture with an absorbent cloth, or shaking smaller mats and allowing excess water to run off the larger roll goods.

CAUTION: Flexible vinyl products are slippery when wet. They are not recommended for use in areas/environments that are constantly wet.

Ensure that both the mat and the floor surface are both completely dry before placing the mat back on the floor. If one or the other or both are not completely dry, the plasticizer can interact with nitrocellulose lacquer (used on older wood floors) or various floor waxes and other cleaning agents (used to clean tile, resilient vinyl flooring, and marble floors, etc.), in a process generally referred to as “lacquer mar”. This can cause the lacquer or wax to soften, resulting in a marred surface. To avoid such complications, ensure that both the mat and floor are completely dry.

DO NOT USE HEAT of any kind to dry PVC materials. Though inherently flame resistant, Polyvinyl Chloride products will burn when given enough exposure to open flame or other heat sources of sufficient temperature-regardless of type or amount of flame retardant(s) added to the formulation.

AVOID: Halogens, concentrated Oxidizing Agents, Ethers, Ketones, and Low-Molecular Weight Solvents derived from the Ether and Ketones families. They include (but are not limited to) TetraHydroFuran (THF), Methyl Ethyl Ketone (MEK), Methyl IsoButyl Ketone (MIBK) and Acetone. These chemicals will mar and/or destroy the surface of the PVC product (the Ketones), react with (Oxidizing Agents), or actually dissolve it (THF and other Ethers).

FLAMMABILITY RATING
Pass* DOT FMVSS 302 [Horizontal Burn Test]
Pass, <1” diameter CPCS FF 1-70 [Methenamine Tablet Test]
*Product failed to burn long enough to reach the required 1 ½” length to start the test

CHEMICAL RESISTANCE
Resistant to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.