18" x 36" - Faux Concrete Luxury Vinyl Tile

With a modern stained-concrete design, this product provides a premium look, feel and superior durability. The heavy gauge backing and annealed construction offer excellent dimensional stability and wear resistance, while the tough vinyl top wear layer ensures superior stain resistance as well as lower maintenance. All the advantages of vinyl and adding the look and texture of nature’s materials.

Available in 12 distinctive styles

MAINTENANCE
We recommend using a non-rinsing cleaner that leaves no film and suggest that you vacuum, sweep or dust mop twice per week. High-traffic areas might require more frequent cleaning.

Wipe up food and other spills immediately using recommended cleaner and a soft cloth. You should NEVER USE ABRASIVE CLEANERS, POWDERS, OIL CLEANERS, WAXES OR DISH DETERGENT. These will scratch the surface or leave a film.

When using a vacuum, if possible turn off the beater and use a hose or wand with an upholstery attachment. Vacuum wheel may also be a source for indenting and scuffing, check the wheels for embedded grit. To remove scuff marks you can use a soft cloth to rub it out. If they difficult to remove try using a product named “Oops Painter Wipes”. Rinse the area well afterwards with clean warm water and allow to dry. Please note that these procedures may help remove stains from vinyl floors, but cannot guarantee complete removal. Burns, holes or “permanent” stains may require a replacement “patch of that section of the floor.

To remove damaged planks you can use a hair dryer, which heats up the adhesive allowing the plank to be picked up. When the plank is up, use a wide blade putty knife and pull it out, then put the new plank down once the surface has been prepared. You should NEVER USE A HEAT GUN as this emits too much heat and will damage the planks.

SIZES
Sold per carton with a quantity of fifteen (8) 18" x 36" planks for a total coverage of 36 sq. ft.

TECHNICAL SPECIFICATIONS
Stability (EN 986): Pass
Abrasion Resistance (EN 660): Excellent (<0.15g/1000 cycles)
Static Load (ASTM F970 - Modified): 2000 psi
Sound Insulation (DIN 52210): 4dB
Slip Resistance (ASTM D 2047): Pass (Exceeds ADA Recommendations)
Stain & Chemical Resistance (ASTM 925): Pass
Light Resistance (F 1515): Pass
Indentation Resistance (F 1914): Pass (<8%)

FLAMMABILITY RATING
Radiant Panel Test (ASTM E648): Class 1
Smoke Density (ASTM E662): Pass (<450 sdi)
Heat Stability (ASTM 1514): Pass
HUD/FHA Requirements: Exceeds

Construction: Class III Printed Film Vinyl Tile, Type B Embossed Surface
Wear Layer Thickness: 40 mil (1.0mm)
Product Height: 0.125"
Tile Size: 18" x 36"
Coverage: 36 sq. ft. per carton
Production Time: 7-10 Business Days