SuperComfort Anti-Fatigue Logo Mat

Our SuperComfort Anti-Fatigue Logo Mat is a premium mat that delivers comfort and support while undertaking tasks that require standing for extended periods of time while prominently displaying your logo or design in vivid color.

Vivid multi-color images are created by molding digitally printed thermoplastic material onto a durable nitrile rubber surface, ensuring long-lasting, high-impact visuals. The diamond-patterned surface provides superior traction and is UV-, chemical-, and oil-resistant, making it ideal for a variety of commercial and industrial environments.

Mat Size                             Maximum Imprint Area
2' x 3' (24" x 33")                 12" x 22"
3' x 5' (32" x 58")                 24" x 44"
4' x 6' (46" x 69")                 36" x 50"

Minimum Text Height: 1/4"
Minimum Line Thickness: 1/16"

These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.

Available in 150 designer-selected colors to complement any décor or branding.

Certified high-traction by the National Floor Safety Institute (NFSI)

TECHNICAL SPECIFICATIONS

Construction: Nitrile rubber with High-density, closed-cell nitrile/PVC-blended foam 
Logo/Image Material: Polymeric film
Overall Thickness: 5/8”
Production Time: 10-14 Business Days

Compression Deflection: 
47.8% at 20 psi
61.6% at 40 psi 

ASTM C1028-96 static coefficient of friction:
Dry 0.79
Wet 0.75

Flammability standard DOC-FF1-70: Passes
Melt point over 500 degrees F. Tested at temperatures up to 1800 degrees F for welding/slag resistance.

MAINTENANCE
If needed, clean by scrubbing with a deck brush. Use detergents with a neutral pH. Rinse with a hose or pressure washer. Lay flat or hang to dry.

Important Note: White is prone to discolor and cannot be used as the background or any part of the imprint area. The product's color palette offers three light colors to use in place of White:  F5, N9 and N10. The background color of the imprint area should not be set to these light colors.

We will do our best to match a PMS color, however, color matching can be extremely challenging.  Although we can get close, color is never an exact science and variations will occur.  An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing.  Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off.  For the PMS color to be as close as possible, we require additional time to create the proof sketch.